Land of Size

The easiest guide to reupholstering a sofa for beginners

This beginner’s guide will give you an overview of reupholstering a sofa in a quick and easy way, accompanied by photos and bitesize instructions. I used this exact method to reupholster my sofa after it was ruined by bad tenants while travelling around Asia.

I am going to show you in quick and easy stages, how to go from this:

Before: Stained beige sofa

To this:

After: Reupholstered grey sofa

When choosing your upholstery fabric, make sure that you have enough to cover your entire sofa or that you can get more if you run out. I recommend using upholstery fabric specifically as it is hardwearing and it keeps its shape. Some is fire retardant so it burns less easily. Be wary of patterns as you’ll need to match them up, plain fabric can be best for a beginner.

This post may contain affiliate links.

Things you will need to reupholster a sofa

As well as your fabric, and a sofa, these are the things that you’ll need to upholster a sofa.

You will need:

If you don’t have a sewing machine then you could rent or borrow one for the cushions. I recommend using an electric staple gun as it will make your life a lot easier. You will use a LOT of staples so make sure you have enough and that they’re the right size. A hammer can help you to get your tacks in if you’re struggling.

These are the 20 steps to transform your average sofa into the furniture of your dreams:

1. Separate your sofa if it’s big and turn it upside down. Remove all the staples from the bottom cover and remove it. You can replace this with new black fabric afterwards.

Removing staples from sofa

KEEP ALL PIECES INTACT AS YOU WILL NEED THESE LATER.

2. Look inside your sofa and take a picture so that you can see where everything goes. Now you can take it apart. Use a spanner to loosen bolts and take the arms off.

Inside the sofa

3. Now take the staples out of the covers that go underneath your sofa and make your way from there.

Sofa frame with foam covering

4. Peel off the pieces of fabric and then take pictures of how they are assembled to help you later.

Inside sofa cover

5. Unpick the covers using small scissors or an unpicker so that they are in flat pieces.

Unpicking a sofa cushion

6. Lay your flat pieces onto your new fabric. Make sure the fabric grain and pattern is going the right way! Pin or weight your pieces in place. Cut around them to make your new pieces. Use black fabric for the bottom of the sofa and underneath the seats.

Laying out pattern pieces

Iron the pieces flat if they’re not flat already so you can cut around them.

Ironing pattern pieces

7. Create your piping if necessary. Create piping by cutting strips of fabric and sewing them around the cords. Use a piping foot on your sewing machine to make it easier to sew around the cord neatly.

Sewing sofa piping

8. Sew your piping to your pattern pieces. Lay the piping onto the front side of the fabric facing inwards. Make sure to stitch close to the piping when you attach the cushions together.

Pinning sofa piping

9. Sew your pieces back together in the same way as the originals.

10. Put your zips in. Use the picture below as a reference, pin the zip onto the front sides of the fabric and sew it on.

Inserting a zip into a sofa cushion

To stop your ends being messy, sew over the ends of your zip and then attach the next piece to disguise the end of the zip neatly.

Inserting zip into a sofa cushion

11. Apply foam covering to your sofa or cushions if any of it needs to be replaced. Wash and clean any inners that can be salvaged.

12. Zip your cushion covers back on to check that they fit. Snip off any thread ends. Make adjustments if necessary.

Large piped sofa cushion

13. Clean your sofa frame.

14. Lay your pieces onto your sofa frame to see if they fit.

Lay pieces onto the sofa frame

15. Tack your pieces into place – make sure they are stretched tightly around the frame.

16. When you’re happy staple them into place in the same way that they were before you took them off.

Stapling covers back on

Make sure that the piping on the arms is in place if you have it.

Piped sofa arm cover

17. Reassemble your sofa by screwing the arms back on.

Screwing arm onto sofa

18. Make sure all of your fabric is caught inside the frame and you can’t see any joins or staples. Cover the bottom with black fabric if you’re happy.

Half of sofa covering

19. Put sofa together and replace the cushions.

20. Take a seat.

Cat on the newly upholstered sofa

Remember to protect your new cover with a throw to make sure your hard work doesn’t get ruined!

I hope you enjoyed this beginner’s guide to upholstery and that it’s inspired you to do your own!

Share your upholstery stories or questions with me in the comments or on social media.

Related:

Pin this for later:

The easiest guide to reupholstering a sofa for beginners
Exit mobile version